arduino/sketch_lcd/sketch_lcd.ino

79 lines
1.8 KiB
C++

// https://www.arduino.cc/en/Reference/LiquidCrystal
// https://www.youtube.com/watch?v=dZZynJLmTn8
// https://www.youtube.com/watch?v=R-CRIthB7ZY
// http://howtomechatronics.com/tutorials/arduino/lcd-tutorial/
#include <DHT.h>
#include <LiquidCrystal.h>
#define DHT_APin A0 // Pin Análogico al que he conectado el sensor
#define DHT_Type DHT22 // mi sensor es el DHT11
// init
DHT dht(DHT_APin, DHT_Type);
LiquidCrystal lcd(9, 10, 4, 5, 6, 7); // syntax: LiquidCrystal(rs, enable, d4, d5, d6, d7)
int timer = 0;
void setup() { // put your setup code here, to run once:
Serial.begin(9600);
dht.begin();
lcd.begin(16, 2);
pinMode(13, OUTPUT); // 13 es el pin con el led
lcd.print(" hue hue hue");
}
void loop() { // put your main code here, to run repeatedly:
timer--;
if (timer <= 0) {
// Reading temperature or humidity takes about 250 milliseconds!
// Sensor readings may also be up to 2 seconds 'old' (its a very slow sensor)
float h = dht.readHumidity();
float t = dht.readTemperature(); // lectura en Celsius, readTemperature(true) para Fahrenheit
if (isnan(h) || isnan(t)) {
Serial.println("E"); // E = error, para el script en python que lee
return;
}
// Compute heat index in Celsius (isFahreheit = false)
float hic = dht.computeHeatIndex(t, h, false); // sensación térmica
// D = DHT, para el script en python que leerá esto
Serial.print("D h:");
Serial.print(h);
Serial.print(" t:");
Serial.print(t);
Serial.print(" i:");
Serial.print(hic);
Serial.println("");
lcd.clear();
lcd.print(t);
lcd.print("C ");
lcd.print(h);
lcd.print("%");
lcd.setCursor(0, 2);
lcd.print(hic);
lcd.print("C");
digitalWrite(13, HIGH);
delay(100);
digitalWrite(13, LOW);
//delay(60000); // 1 minuto
timer = 60;
}
lcd.setCursor(14, 2);
if (timer < 10)
lcd.print(0);
lcd.print(timer);
delay(1000);
}